THE BULB BLOG

Rear projection TVs have evolved greatly in the last few years. These TVs that are also called as RPTVs use the same technology that is used in projectors. They make use of a rear projection TV lamp that burns out with usage. When a projection TV lamp burns out, it obviously has to be replaced.

If you own a Sony XBR TV and want to replace its rear projection TV lamp, just visit BulbToGo.com. Here you’ll find various high quality Sony projector lamps on sale at very competent prices. Depending on your TV model, you can select the right rear projection TV lamp.

If you want to replace the original projector TV lamp of your Grand WEGA A Series TVs, we have with us the XL-5200 TV replacement lamp from Sony. This rear projection TV lamp is compatible with other models like KDS-50A2000, KDS-55A2000, KDS-60A2000, and KDS-60A2020. It also comes with a warranty of six months.

We also offer the XL-5300, which will make a perfect replacement projector lamp for XBR2 SXRD rear projection TVs such as the KDS-R70XBR2 or KDS-R60XBR2 SXRD televisions.

Your choice does not end here. BulbToGo.com also offers the XL-2100, which is an ideal replacement projector lamp for Grand WEGA or XBR Grand WEGA LCD TVs. This TV replacement lamp is also compatible with several models, including KF-42WE610, KF-50WE610, KF-60WE610, KDF-60XBR950, KDF-70XBR950, KDF-50WE655, and KDF-42WE655.

In addition to these, we have many other models of Sony replacement lamps available here. Visit BulbToGo.com and you are sure to find the right replacement lamp for your TV.

When the images on your screen appear dim, distorted, or discolored, it is a sign that the DLP TV lamp in your TV is damaged and needs to be replaced. The process of TV lamp replacement is simple and can be done at home by following these simple steps.

• Switch off the TV and unplug the electric cord one and a half hour or two hours before you attempt to replace the DLP TV lamp. This will ensure that the lamp is completely cool when you remove it.

• Find the door with the bulb and remove the cross-headed screws.

• Once the panel comes loose and the case housing the rear projection TV lamp becomes visible, slide out the case.

• Remove the screws at the side of the case and ease off the old lamp.

• Insert the new projector lamp without touching the lens. It is a delicate job and needs to be done gently and not with force.

• Once you hear the click, you’ll know that the DLP TV lamp is firmly in place. Now replace the lamp housing unit and your job is done.

But before you set off on the task, buy the correct DLP replacement lamps. The TV replacement lamp you choose should be of the same type and have the same code as the lamp you’re replacing. BulbToGo.com has a wide range of DLP replacement lamps such as OSRAM lamps and you can find just the TV replacement lamp that you are looking for.