DLP technology Projector LampsDLP technology has overcome the drawbacks of the traditional LCD technology used in projector lamps. The poor and blurred quality image produced by the LCD, paved way for the use of DLP technology. With the advent of this technology, the images obtained are sharper and clearer.

The DLP projection system works on the basis of a DLP chip. These DLP chips are made up of many micro mirrors. These mirrors are in turn made up of aluminum for the purpose of reflecting light and form clear pictures. The micro mirrors are arranged in the form of a matrix and each mirror represents a pixel which refines the quality of images.

The chip tilts itself towards or away from the projector, as directed by the image code that enters the semiconductor. As a result the color of the pixel is determined. When the chip is directed towards the projector lamps, a light grey pixel is reflected and a dark grey pixel is obtained when the chip is switched off.

Another vital advantage of the DLP technology is the Brilliant Color Technology. The lamp generates white light, which is directed towards the chip. The chip in turn has filters on its surface which further separates the white light into a minimum of three colors; red, blue and green. 16.7 million colors can be produced by a single chip in a DLP projection system.

With the micro mirrors on the chip and the BrilliantColor Technology, the DLP technology used in projector lamps provide quality image. A wide range of DLP projector lamps are available at BulbToGo.

VN:F [1.6.3_896]
Rating: 0.0/5 (0 votes cast)
VN:F [1.6.3_896]
Rating: 0 (from 0 votes)

Lightweight projectorsTravelling with projectors is necessary for many, especially for those who are in a profession that demands giving presentations in different places. In such cases projectors need to be handled properly so that they will last for a long time.

The most important thing to keep in mind is to use lightweight projectors, as they are lighter when compared to the traditional projectors and are thus easy to carry. Usually lightweight projectors are also facilitated with smaller footprints, which make them portable.

The use of wireless projectors is called for as they would make presentations easy as the time required to setup the projectors can be saved. The brightness of the projector lamps is also a factor, which plays an important role during travel. A minimum of 1000 lumen projector lamp will be ideal in adjusting to different light conditions.

Good images and clear presentations are possible only when the projector lamps are in good condition. So while travelling it will be good to have an additional replacement projector lamp. These lamps will come in handy when the projector lamp fails unexpectantly. A wide variety of replacement projector lamps for projectors, such as ACER, PREMIER, and VIEWSONIC are available at BulbToGo.

If travelling involves presentations in many countries, then a projector with universal power supply would be preferable. This power supply will detect the type of voltage available and adjust accordingly, to produce flawless images. Also, a good and compact travelling case would be useful to carry the projector.

VN:F [1.6.3_896]
Rating: 0.0/5 (0 votes cast)
VN:F [1.6.3_896]
Rating: 0 (from 0 votes)

OSRAM replacement projector lampOSRAM projector lamps in general are compatible with almost all kinds of projector models. For instance, the OSRAM P-VIP180-230W/1.0 E20.6 replacement lamp can be used in a variety of projectors, including Acer, Lenova, Optoma, Premier, Viewsonic, Eiki, and 3M.

This OSRAM replacement lamp is compatible with Acer projectors with a lamp code as EC.J5200.001 and projector codes P1165 and P1265. Other Acer projectors with lamp codes as P5260 and P5260i and a common lamp code as EC.J5400.001 can use this OSRAM projector lamp. In addition to the above mentioned projectors, the OSRAM P-VIP180-230W/1.0 E20.6 replacement lamp is compatible with Acer P7270 and Acer P7270i as well.

If you own Optoma projectors with projector codes, EP723, EP723MX, and EP728, and a lamp code as SP.89M01GC01, or projector codes as DX752 and EP752 and lamp code as SP.87J01GC01, then this OSRAM replacement lamp will be apt. Also Optoma projectors with lamp codes as, EP776, HD71, HD710, HD75, TS723, TX728, TX752, and TX776 and projector bulb codes SP.88E01GC01, SP.8AE01GC01, SP.8AE01GC01, SP.8AE01GC01, SP.89M01GC01, SP.89M01GC01, SP.87J01GC01, and SP.88E01GC01 respectively can use this projector lamp.

LENOVO projectors with projector and lamp codes as C20, T02, and TO6 can also make use of this OSRAM replacement projector lamp. It is also suitable for Premier projectors with codes PD-S618 PD-S650 PD-X665 with bulb codes PD-S618, RLC-018, and PD-X665 as well.

Viewsonic projectors having codes PJ506, PJ506D, PJ506ED, PJ556, PJ556D, and PJ556ED, with Eiki projectors having codes EIP-S200, EIP-X200 and a common projector bulb code RLC-018 and alternate lamp code P8384-1001 will have a perfect fit. It is also suitable for 3M projector with projector code and projector bulb code SCP740.

So if you own any of these projectors, then get the OSRAM P-VIP180-230W/1.0 E20.6 replacement lamp from BulbToGo today and bring your projector back to life!

VN:F [1.6.3_896]
Rating: 0.0/5 (0 votes cast)
VN:F [1.6.3_896]
Rating: 0 (from 0 votes)

OSRAM P-VIP 250 1.3 E21.8 ProjectorWhen compared to regular incandescent bulbs, projector bulbs shine brighter and generate a lot of heat. These bulbs are very sensitive and can fail anytime. So replacement projector lamps are very essential to keep your projector working in a good condition. The important factor that needs to be considered by a projector owner is to choose the appropriate replacement projector lamps for their projector. Choosing the right projector bulb will improve the efficiency of the projector.

The choice of replacement projector lamp is based on the projector you own. BulbToGo offers a wide selection of replacement projector lamps for you to choose from. They offer the OSRAM lamps that are highly sought offer by many people for their reliable and long-lasting performance.

The OSRAM P-VIP 250/1.3 E21.8 replacement lamp would be your best choice if you want to replace the projector bulb in a variety of projectors including BenQ, Boxlight, and Premier. The OSRAM P-VIP 250/1.3 E21.8 replacement lamp is compatible with BenQ projectors MT700, PE7700, PE8720, W10000, and W9000 with the following projector bulb codes 59.J0C01.CG1, 59.J0C01.CG1, 59.J0B01.CG1, and 59.J0B01.CG1. With respect to Boxlight projectors it is compatible with AV-3618+, CD-726C, CD-737X, PRO4500DP projectors with projector bulb codes 1730052, CD726C-930, CD737X – PRO4500DP. Also the Premier projectors PD-X702, PD-X760, PD-X778, PD-X780, PJ-X903 with projector bulb codes P3784-1009 RLC-020, PD-X760, PD-X778, PD-X780, PJ-X903. The OSRAM replacement lamp is also compatible with few other projector models that include Vivitek, Viewsonic, Video7, Sharp, Sahara, Nexgen, and HP.

Sometimes finding the right projector bulb can be very hard. The online store BulbToGo helps you by offering a variety of projector bulbs at affordable prices. Choose the appropriate one to save your projector and its performance as well as your money.

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)

OSRAM Model P-VIP 200W 1.0 E19 Replacement LampWhen you need an effective replacement for your projector lamps, then look no further than BulbToGo! They have a wide range of projector bulbs, projector lamps, and other requirements for your projector.

When your projector lamp starts displaying poor lighting and blurry images, it may be a sign that it has exhausted itself of its effective life. In such cases, it is required that you get replacement projector lamps that will deliver the same, if not better, quality of light.

The OSRAM Model P-VIP 200W 1.0 E19 Replacement Lamp can be a good substitute for several projector lamps. The product comes with a single lamp with a 200 watts bulb. You can be assured of its high-quality because it comes with a six-month warranty.

When a lamp from a different manufacturer is used in a projector, many quality issues may arise, such as poor lighting that flickers and relatively shorter life. But Osram is a reliable manufacturer that provides replacement projector lamps that are long-lasting and are compatible with several makes and models of projector lamps. Their P-VIP lamps have been crafted keeping in mind the various models that it may have to work with.

So, make use of an Osram replacement lamp when it’s time to change your projector lamp. Visit BulbToGo for your various projector needs!

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)

OSRAM P-VIP 100 1.3 E23 Replacement LampProjectors need replacement projector lamps because projector bulbs do not last a lifetime. Projectors are very expensive and need to be maintained carefully. Due to the expensive initial costs and high maintenance costs, replacement projector lamps are increasing in popularity for several reasons. The right time to purchase new projector bulbs are when we keep using the projector regularly the bulb becomes less effective and emits less light making the picture look dull. Wondering where to buy high-quality replacement projector lamps? BulbToGo is the ultimate destination. You will find a wide range of replacement projector lamps and rear projector TV lamps at affordable prices.

OSRAM, a part of the industry sector of Siemens AG, is among the top two lighting manufacturers in the world. OSRAM projector bulbs are reliable and highly sought after by many people. BulbToGo sells almost all projector bulbs from this brand, including OSRAM P-VIP 100/ 1.3 E23 Replacement Lamp.

The OSRAM P-VIP is the original bare replacement lamp for your Mitsubishi DLP TV. It can also be used in both 52” Mistubishi DLP TVs and 62” Mistubishi DLP TVs. The OSRAM replacement lamp can be used in the place of lamps having the following codes 915P020A10, 915p020010, 915P026A10, 915P026010. The OSRAM replacement lamp is also compatible with a few other projection TVs like Sagem Axium DLP TV Models, OPTOMA DLP TV Models, and LG/Zenith LCD Models.

Buying a projector is easy nowadays, but replacing the projector lamp is very expensive. So you have to buy the best and avoid wasting money on fake duplicates. BulbToGo does not sell the compatible bulbs but manufactures the original bare projector lamps. The OSRAM projector lamp comes with a 6-month warranty and is available at reduced prices. For uninterrupted performance from your projector, buy OSRAM lamps from BulbToGo.

VN:F [1.6.3_896]
Rating: 5.0/5 (2 votes cast)
VN:F [1.6.3_896]
Rating: +3 (from 3 votes)

Osram P-VIP 150- 180W 1.0 E20.6 replacement LampOsram is a reliable choice for projector bulbs and projector lamps that are consistent in their performance. When your projector lamp has exhausted itself of its effective life, then you know that it’s time to get a replacement. For efficient and durable replacement projector lamps, BulbToGo is a great place to drop by.

The Osram P-VIP 150- 180W 1.0 E20.6 Replacement Lamp is an excellent choice for effectively replacing projector lamps for several projectors, including Optoma, Sanyo, Viewsonic, and Premier. The Osram P-VIP 150- 180W 1.0 E20.6 Replacement Lamp is of 180 watts and comes with a six-month warranty, so you don’t have to worry about replacing your projector lamp for a long time.

The Osram P-VIP 150- 180W 1.0 E20.6 replacement lamp is manufactured keeping in mind several models of projector lamps. If you have an Optoma projector with a projector code as EX530, lamp code as 5811100256-S, then you can go for this Osram Replacement Lamp.

On the other hand, if you own a Premier projector with SPD-S550 as projector code and lamp code as 610 337 1764 or P0T84-1010, then the Osram P-VIP 150- 180W 1.0 E20.6 Replacement Lamp will be a suitable substitute.

PDG-DSU20, PDG-DSU20B, and PDG-DSU21 Sanyo projectors with a lamp code as 610 337 1764 can also be replaced with the Osram P-VIP 150- 180W 1.0 E20.6 Replacement Lamp. Viewsonic projectors with projector codes PJ551D, PJ551D-2, PJ557D, PJ557DC, PJ559D, PJ559DC, PJ560D, PJ560DC, PJD6210, and PJD6210-WH and lamp code as 610 337 1764 can effectively be replaced with this Osram replacement lamp.

So, when your projector lamp loses its effective life, stop worrying too much and get the Osram replacement projector lamps from BulbToGo.

VN:F [1.6.3_896]
Rating: 5.0/5 (2 votes cast)
VN:F [1.6.3_896]
Rating: +2 (from 2 votes)

January 9th, 2010All about Projector Lamps

OEM compatible lampsBefore buying a projector, it is important to know everything about projector lamps, lamp replacements, care and maintenance, and much more. Basically, you will find two types of projector lamps in the market that include OEM lamps and OEM compatible lamps.

There are only two choices left to you once your projector requires a replacement lamp. One is to go for a lamp of the same brand or standard, and the second option would be to replace it with an alternative lamp. Generic lamps are used only in an unavoidable situation.

OEM lamps

OEM means Original Equipment Manufacturer. Since they are from the original manufacturer, OEM lamps are of the highest quality available and the most preferred ones when compared to other projector lamps. These lamps are also called as genuine lamps that have the longest lamp life under ideal conditions.

OEM lamps are manufactured by leading manufacturers that include Philips, Osram, Ushio, Phoenix, Iwasaki, Matsushita, and much more. OEM lamps are expensive when compared to other replacement lamps.

OEM compatible lamps

OEM compatible lamps are next alternatives for projector lamp replacement. They are manufactured by different companies in quality controlled process, which give them long lamp life.

Unlike OEM lamps, OEM compatible lamps are readily available in the market. They are also cheaper than OEM lamps. The only disadvantage in OEM compatible lamps is their variable lamp life.

It is you who has to decide which projector lamp is best for your projector. BulbToGo offers a wide variety of replacement projector lamps at competitive prices.

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)

replacement projector lampAlthough projectors are easy to use, maintaining them is a different job altogether. A projector consists of many smaller parts, especially the projector lamps, which are vulnerable to damage. When the need arises to go in for a replacement for your lamp, the replacement projector lamps come in handy.

Finding an exact replacement projector lamp for your projector that will also be light on your pocket can be a daunting task. To help you out, here is a projector lamp buyer’s guide that will help you find a superior projector lamp at an inexpensive rate.

When it comes to locating projector lamp bulbs, the first step would be to check with the suppliers online. Even though you’ll find a number of projector lamp suppliers who will offer different types of the replacement projector lamp, always make sure you go to a trustworthy supplier, such as BulbToGo.

It is often difficult to find compatible lamps for projectors that you have bought quite a long time ago. In such cases, it is a good idea to contact the supplier to get the replacement projector lamp that’ll meet the specific requirements.

If you’re not able to locate the exact original replacement lamp for your projector, then you can take the help of the supplier to get the alternative replacement projector lamp bulbs. At BulbToGo you’ll find a varied choice of original as well as alternative replacement lamps, which are sure to meet your requirements.

VN:F [1.6.3_896]
Rating: 0.0/5 (0 votes cast)
VN:F [1.6.3_896]
Rating: 0 (from 0 votes)

Projector LampsIn projection systems, a projector lamp is the key component. Every time we buy replacement projector lamps, we look for projector lamps that would work better and last longer. Now, you can get the best of both worlds by opting for lamps that make use of Ultra High Performance (UHP) technology. UHP projector lamps definitely have an upper hand over traditional projector lamps in both areas.

Apart from longer lamp life, UHP lamps have several other advantages. These lamps have a compact design in contrast to big, bulky, and heavy traditional projector lamps. The smaller size doesn’t compromise on the performance in any way. UHP projector lamps deliver a greater level of brightness than traditional projector lamps. So you can expect a better picture quality.

Most of the traditional projectors make a lot of noise when in use. This sound can be very distracting. UHP projector lamps are the perfect solution to this problem. The quietness with which these UHP lamps perform comes as a refreshing change.

Overheating of projector lamps has always been a cause for concern. But UHP lamps put an end to this perennial problem. Projector lamps with UHP technology use relatively less energy to run. So they don’t get as hot as traditional projector lamps. This means they’re good for the environment too.

With so many advantages, it will definitely be a wise decision to opt for UHP replacement projector lamps than traditional projector lamps. To shop for any kind of projector lamps of the highest quality, visit BulbToGo.com.

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)



Copyright © 2009 The Bulb Blog All rights reserved.