THE BULB BLOG

A video projector is an indispensable part of most businesses and presentations. Before investing in a projector, you should analyze all the features to get the best models available in the market. This video projector buyer’s guide will help you make an informed decision.

The first thing to consider before buying a video projector would be to think about the place where you intend to use the projector. For instance, if you’re planning to use the projector in a small, dark room, then it will suffice to use a projector with less lumen. Whereas, in a large hall, you can go for a projector with more light intensity to enjoy a brighter image.

A factor that complements brightness is the contrast ratio. A high contrast ratio helps avoid washed-out images. A contrast ratio of at least 1500:1 is recommended in order to experience whiter whites and blacker blacks.

Portability of the video projector is another factor that needs to be considered. The smaller and lighter the video projector, the easier you can move it around.

For the video projector to deliver excellent image clarity, a projector lamp is one of most important factors to be considered. The life of a projector lamp is typically a few thousand hours. Once the luminous intensity falls well below the initial capacity, and the images aren’t projected as remarkably, then it is an indication that it is time to go for a replacement projector lamp.

If your projector lamp needs to be replaced to return vivid clarity to your presentations, then choose from an expansive collection at BulbToGo.com. They carry high-quality replacement lamps at affordable prices.

Selecting a replacement projector lamp can be very confusing, given the amount of choice available in the market today. But a particular bare lamp can be used only with certain projectors.

For instance, there is a huge difference between the P-VIP 180/230W 1.0 E17.5E & U bare lamps. The Osram P-VIP 180/230W 1.0 E17.5E replacement lamp can be used with Acer PD125 Projectors with lamp code L1720A and alternate lamp code EC.J1601.001. You can also mount this replacement projector lamp on HP’s mp3220, mp3222, mp3320, and mp3322 DLP Projectors with lamp codes L1720A, L1720A, L2152A, and L2152A respectively. 

The Osram P-VIP 180/230W 1.0 E17.5E replacement projector lamp also goes with Toshiba TDP-T80, TDP-T90, TDP-T91, TDP-T98, and TDP-TW90 projectors with the lamp code TDPLW3. You can also use this as a replacement lamp on Luxeon D-418V, D-625MX, and D-630MX projectors.

Further, Sahara S2601, S2618, and S3618 Projectors with lamp codes17300563797088600-S, 17300363797094000-S, and 17300363797094000-S respectively can also use this lamp.

In addition to the above, the Osram P-VIP 180/230W 1.0 E17.5E is ideal for ViewSonic PJ402 and PJ402D Projectors with the lamp code RLC-001. Other ViewSonic projector models such as PJ450D, PJ452D, and PJ455D with the alternate lamp code 17300363797094000-S can also use this replacement lamp.

IBM E400 and E500 Projectors having a lamp code of 73P4954 and alternate lamp code of 73P4966, Boxlight SP-650z with SP650Z-930 as lamp code, and GP Evergrow GP-DLP12 Projector can also use this replacement projector lamp.

The Osram P-VIP 180/230W 1.0 E17.5U on the other hand can be used with Toshiba TDP-S8 and TDP-T9, projectors. So before you buy a replacement projector lamp keep in mind the lamp codes. BulbToGo.com offers both these bare lamps at a competitive price.

You might be aware of the fact that projector lamps can be replaced if they get exhausted. This process of replacing worn-out projector lamps is called relamping. It is a simple process and needs no special expertise.. Iif you have a spare replacement lamp at hand, you can relamp it all by yourself.

You buy a projector only after ensuring its quality. So, asking you to get a spare lamp might sound strange. But there is more to it. Though projector lamps generally last for about 2000 hours, we cannot predict when it will actually burn out. Calling a technician for help when your lamp goes off while you are watching something totally messes up the mood. But, if you have a spare projector bulb, you can just remove the old bulb and replace it with the new one and keep things going.

For an uninterrupted performance from your projector, it is better to have a replacement projector lamp ready. Moreover, replacement lamps hardly take up any space and you needn’t worry about storing them. But, make sure that the projector lamp comes with a housing or a cage. Because, you leave the pressure tube of the lamp open to damage when you buy it without the housing.

Well! Bulbtogo offers replacement projector lamps from leading brands for your projector. The projector bulb comes with a housing or cage that ensures safety when you replace your projector lamp. So if you have made up your mind to buy a spare replacement projector lamp then BulbToGo is the best place.

The market today is flooded with fake electronic products. From DLP projector or LCD projector to a projector bulb or replacement projector lamp, you’ll a whole lot of fake stuff all around you. When buying a projector bulb or a replacement projector lamp, buyers need to make sure that it is not a fake lamp.

A fake projector lamp is the one that looks like a genuine projector lamp when it’s actually not. They might look almost the same in appearance; but are inferior in quality. When you buy a fake replacement projector lamp you may also land in serious trouble. There are possibilities that you might have to deal with mercury leaks, which are very poisonous. That is why you must be careful while buying a projector lamp, more so when you are doing it online.

Here are some guidelines to identify fake projector lamps

• If the lamp doesn’t have a housing or cage, then it is highly likely that it is a fake one.

• If you find codes like PL or GL on the part numbers, then do not buy the lamp. These codes are the ones normally used by copy-lamp manufacturers.

• If you find the term “100% brand new” or “OEM Equivalent” on any of the lamp then it is likely to be a bogus lamp. Don’t fall a prey to such tricky advertisements.

• If the company offers the replacement projector lamp or replacement lamp or projector bulb for an unreasonably low price, beware! It may be a fake one!

• Do not be taken in by a manufacturer logo as counterfeit lamp makers may use logos even for fake ones.

BulbToGo has a huge collection of genuine replacement bulbs and other projector bulbs. As a trust-worthy company, you can count on us to sell only genuine lamps.

When it comes to replacing the projector lamp in your TV or projector, there are two options available. One is the bare lamp and the other is the replacement lamp with housing.

A replacement projector lamp generally comes with a housing unit, which contains the bare lamp. When the lamp dies out with usage, you can either replace the entire housing unit or you can just replace the bare lamp inside the existing housing unit.

Whichever replacement projector lamp you opt for, you will get the same performance from both. However, the cost associated with both varies significantly. It is much less expensive and also much easier to replace the bare projector lamp alone rather than replacing the entire housing unit.

When a projector lamp dies out, it is only the lamp that goes bad, whereas the housing unit remains intact. So, by opting to replace only the bare lamp you can cut the replacement almost by half. Moreover, these housing units are made of plastic. When you use replace just the lamp, you can re-use the whole unit, thus helping the environment.

BulbToGo.com offers a variety of bare lamps from a number of brands. You’ll find bare lamps for various projectors. For instance, if you own the Optoma DV10 or HD70 projector models, we have with us the bare lamp SHP69 HG, which will make a perfect replacement bulb.

We also have the Osram P-VIP 200/1.3 E17.5 and the P-VIP 200/1.0 E17.5, which are compatible with most Toshiba projectors. In addition, we offer bare bulbs from Philips, such as the UHP 120-100W 1.0 E22, the UHP 120/100W 1.0 E19.8, and the UHP 100W/120W 1.0 E23. Besides these bare lamps from Philips, you can also find a variety of bulbs from Phonics.

A projector lamp has a wide range of applications. It is not only used for presentations in business units and educational institutions, but also in movie or home theaters. Projector lamps are classified into three types, namely overhead, slide, and multimedia projector lamps.

Overhead Projector Lamps – These projectors lamps feature an intense light bulb and a flat base beneath it. This projector bulb sends the image to a special type of mirror, which in turn enlarges the image and delivers it to the blank screen. High-power halogen lamps are generally used in an overhead projector lamp. Business professionals or educators who want to share graphs, sales charts, and other documents will find an overhead projector lamp extremely useful. They are also the most affordable of the lot.

Slide Projector Lamps – These bulbs are especially useful for viewing photographic slides. Projector lamps in a slide projector contain a unique slot for 35 millimeter slides. The images present on each slide are enlarged and then projected on the big screen. Slide projectors are ideal for teachers, professionals, or photographers who demonstrate using physical camera images.

Multimedia Projector Lamps – Images from DVD, film reel, or videotape are enlarged projected on a larger screen by these lamps. Movie theaters and home theater systems make use of a multimedia projector. Though the most expensive among the three, lamps in a multimedia projector last approximately 2,000 hours or more.

Whatever the type of projector lamp, it starts to dim and die out after a certain point of time. When this happens, a replacement projector lamp is what you need. To buy any kind of replacement projector lamp, there is no better place than BulbToGo

Rear projection TVs have evolved greatly in the last few years. These TVs that are also called as RPTVs use the same technology that is used in projectors. They make use of a rear projection TV lamp that burns out with usage. When a projection TV lamp burns out, it obviously has to be replaced.

If you own a Sony XBR TV and want to replace its rear projection TV lamp, just visit BulbToGo.com. Here you’ll find various high quality Sony projector lamps on sale at very competent prices. Depending on your TV model, you can select the right rear projection TV lamp.

If you want to replace the original projector TV lamp of your Grand WEGA A Series TVs, we have with us the XL-5200 TV replacement lamp from Sony. This rear projection TV lamp is compatible with other models like KDS-50A2000, KDS-55A2000, KDS-60A2000, and KDS-60A2020. It also comes with a warranty of six months.

We also offer the XL-5300, which will make a perfect replacement projector lamp for XBR2 SXRD rear projection TVs such as the KDS-R70XBR2 or KDS-R60XBR2 SXRD televisions.

Your choice does not end here. BulbToGo.com also offers the XL-2100, which is an ideal replacement projector lamp for Grand WEGA or XBR Grand WEGA LCD TVs. This TV replacement lamp is also compatible with several models, including KF-42WE610, KF-50WE610, KF-60WE610, KDF-60XBR950, KDF-70XBR950, KDF-50WE655, and KDF-42WE655.

In addition to these, we have many other models of Sony replacement lamps available here. Visit BulbToGo.com and you are sure to find the right replacement lamp for your TV.