projector lampsProjector lamps are vital components of projectors, which ensure efficient performance. It is advisable not to move or drag the projector lamp as it is switched on or as it is initiating to start. This activity may shorten the life span of the lamps or it may make the bulb burst at times.

A number of projectors come with different lamp hour ratings. Projector lamps manufactured after the year 2000 have a life expectancy for 2000 hours or more. If you do not increase the brightness more than that is required, it will add many hours to your projector lamps. Every projector lamp has a built-in lamp hour that starts from zero when it is new. Check the menu system of your projector to find out the total lamp hours or go through your user’s manual for instructions. It may look easy to replace a projector lamp, but it is better to follow the owner’s manual for fixing, since the parts are fragile in nature.

Usually, projector lamps come with a warranty period of 60 days or 90 days. You could find the warranty on the projector bulb by referring to the user’s manual or the manufacturer’s warranty information column. If you’re not provided with any manual, look for an online supplier to get the warranty information.

Projector lamps that contain mercury are hazardous when disposed. So it is safe to contact your audio-visual sales executive to know the disposal laws of your state. BulbToGo, an online store, sells projector lamps, projector bulbs, bare lamps, DLP/TV lamps at reasonable prices. In addition, they also provide you with solutions for lamp replacements.

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)

OSRAM replacement projector lampOSRAM projector lamps in general are compatible with almost all kinds of projector models. For instance, the OSRAM P-VIP180-230W/1.0 E20.6 replacement lamp can be used in a variety of projectors, including Acer, Lenova, Optoma, Premier, Viewsonic, Eiki, and 3M.

This OSRAM replacement lamp is compatible with Acer projectors with a lamp code as EC.J5200.001 and projector codes P1165 and P1265. Other Acer projectors with lamp codes as P5260 and P5260i and a common lamp code as EC.J5400.001 can use this OSRAM projector lamp. In addition to the above mentioned projectors, the OSRAM P-VIP180-230W/1.0 E20.6 replacement lamp is compatible with Acer P7270 and Acer P7270i as well.

If you own Optoma projectors with projector codes, EP723, EP723MX, and EP728, and a lamp code as SP.89M01GC01, or projector codes as DX752 and EP752 and lamp code as SP.87J01GC01, then this OSRAM replacement lamp will be apt. Also Optoma projectors with lamp codes as, EP776, HD71, HD710, HD75, TS723, TX728, TX752, and TX776 and projector bulb codes SP.88E01GC01, SP.8AE01GC01, SP.8AE01GC01, SP.8AE01GC01, SP.89M01GC01, SP.89M01GC01, SP.87J01GC01, and SP.88E01GC01 respectively can use this projector lamp.

LENOVO projectors with projector and lamp codes as C20, T02, and TO6 can also make use of this OSRAM replacement projector lamp. It is also suitable for Premier projectors with codes PD-S618 PD-S650 PD-X665 with bulb codes PD-S618, RLC-018, and PD-X665 as well.

Viewsonic projectors having codes PJ506, PJ506D, PJ506ED, PJ556, PJ556D, and PJ556ED, with Eiki projectors having codes EIP-S200, EIP-X200 and a common projector bulb code RLC-018 and alternate lamp code P8384-1001 will have a perfect fit. It is also suitable for 3M projector with projector code and projector bulb code SCP740.

So if you own any of these projectors, then get the OSRAM P-VIP180-230W/1.0 E20.6 replacement lamp from BulbToGo today and bring your projector back to life!

VN:F [1.6.3_896]
Rating: 0.0/5 (0 votes cast)
VN:F [1.6.3_896]
Rating: 0 (from 0 votes)

OSRAM Projector LampsFor the projector to project fine imagery, a proper illumination system that is a good projector lamp is essential. At times when you get disturbed or blurred images you might tend to mistake the projector to be at fault, but it might not be so.

The projector lamp has several different parts that work together to make the projector bulbs function efficiently. In spite of it projector bulbs might fail due to long operating life or even if you don’t operate your projector properly. In such cases, replacement of the projector bulbs would be ideal and cost efficient. For reliable and less expensive replacement projector bulbs, OSRAM replacement projector lamps are the best choice as they are experts in lightning and also because OSRAM bulbs are manufactured to comply the requirements of several projector lamps.

If you’re looking for replacing projector bulbs for MITSUBISHI projectors with projector code XD470 and code XD470U and common lamp code VLT-XD470LP, then the ideal replacement projector bulbs would be the OSRAM P-VIP 280w 1.0 E20.6 Bulb . This bulb would give you a satisfying quality of light.

The OSRAM P-VIP 280w 1.0 E20.6 Bulb would also fit in perfectly with BENQ projectors with projector codes MPP723 and MP771 and lamp codes as 5J.06W01.001 and 5J.07E01.001 respectively. To be assured of supreme quality and the best affordable price, make sure you purchase the OSRAM P-VIP 280w 1.0 E20.6 Bulb from BulbToGo.

VN:F [1.6.3_896]
Rating: 0.0/5 (0 votes cast)
VN:F [1.6.3_896]
Rating: 0 (from 0 votes)

projector_lampToday, projectors are widely used in business organizations and educational institutions for presentation and seminars. Projector lamps are the vital part of a projector that produces a highly intense and bright light. Mostly, projector lamps offer a life time of about 2000-3000 hours. These lamps show several sure signs as the age and needs to be replaced. Projector lamps show several signs as they decline, they are:

Blurring of light is the foremost signal for replacing the projector lamp.

Flaming of projector lamp is the most common upshots experienced due to the burning of electrodes.

Damaged plugs may also affect lamp life. Substitute the socket if you notice any impairment in the socket as it may affect the projector lamp.

Do you notice any scratches on the lamp surface? Then, it is just the right time to check out for a replacement lamp because the projector lamp works under greater in-house pressure and experiences higher temperature on the surface. If the lamp is cracked; it may burst out all of a sudden causing mercury leak, which may be risky.

With the help of the built-in menu system you can check the number of hours your projector lamp has been used.

Under these circumstances you might certainly go for a lamp replacement. Deciding on projector replacement lamps requires expertise. Simply replacing any lamp without proper research would reduce the longevity of the projector. Replacement projector lamps are an economical way of relamping your projector. BulbToGo.com offers a range of replacement projector lamps that will meet your individual requirement.

VN:F [1.6.3_896]
Rating: 0.0/5 (0 votes cast)
VN:F [1.6.3_896]
Rating: 0 (from 0 votes)

projector lampsShopping for a projector may sound easy, given the number of projectors available in the market. From LCD projectors and DLP projectors to laser projectors and presentation projectors, you have plenty to choose from. But choosing the perfect projector for our needs is not as easy as it sounds. Here are a few projector buying tips that will help you get the right one for you.

The quality of the image is the first aspect to be taken into consideration when buying a projector. Digital Light Processing (DLT) projectors provide images with better quality than LCD projectors. Their high contrast ratio lends depth to the picture. Choose a projector with a contrast ratio of 500:1 or more.

The brightness of the projector lamp comes next in the list of projector buying tips. The brightness, also called as lumen intensity, is not the same in all projectors. Projectors that come cheap use low intensity projector lamps, compromise on the brightness. If do not want this, then buy a projector with a higher lumen intensity as well as higher native resolution. For optimal image quality, projectors with a 1024 x 768 native resolution and 2,000 ANSI Lumens brightness will be ideal.

Size and weight also need to be considered before you pick the projector. Choose a light weight projector, which does not weigh more than 6 lbs. for easy portability
Check whether the projector accepts all the signals that you want to provide it with because projectors of the highest quality alone support high-resolution VGA signals.

You may need to replace the projector lamp after a period of time even in the best projector. To buy the highest quality projector replacement lamps, BulbToGo is the right destination.

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)

Spare Projector LampImagine you are in the middle of an important presentation and the projector lamp dies out. To avoid such embarrassing situations, always have a spare projector lamp as well as an extended warranty on the projector lamp.

Even though a projector lamp has a life of about 2,000 hours, you can never be sure when the last hour will begin and end. So, it’s always good to be on the safer side and have a spare projector lamp ready.

With a back-up projector lamp in hand you stand to gain a lot. And if you take the price factor into account, it might seem like you are spending money needlessly. But, you’ll be saving money in the long run if you buy replacement projector bulbs.

The best part is that there is no expiration date attached to a spare projector lamp. You can be sure that it will not go bad until you have started using it. That is, only when the mercury vapor inside the lamp is pressurized and electrified, does the life of a projector lamp begin.

Extended warranty is also an important aspect. A projector lamp may not work its full stated life. It may die early or break down because of a faulty design. In such cases, an extended warranty will help you out. With an extended warranty, you can get a replacement by lodging a complaint with the company.

BulbToGo.com is a great place to buy projector bulbs of the highest quality at great prices.

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)

Projector lampDigital projectors have become an indispensable part of offices and even homes today. From watching movies to conducting high profile meetings, we use them in our day to day life for several things.

Among the various components of a projector, the lamp is the most crucial one. It is used to stream the images from the projector to the screen. But a projector lamp fizzles out after approximately 2,000 to 3,000 hours. Sometimes, it might die earlier than the indicated life due to various reasons such as manufacturing defects, poor operating conditions, rough handling, and so on.

Here are some few simple tips that can make your digital projector lamp last longer.
Do not use your digital projector continuously for more than three to five hours in a day. Too much heat may cause your digital projector lamp to explode. It is one of the major reasons for projector lamp failure.

Projector lamps are extremely vulnerable to damage when they are moved when hot. So, make sure you do not move your projector lamp, immediately after switching off the power. Always let your digital projector lamp to cool for a few minutes.

Another way to increase the life of your projector lamp is to keep it in a clean environment free from dust. Dust accumulates and clogs the fans and air filter.
These tips help maximize the life of your digital projector lamp and get the most out of your projector.

However, your projector lamp starts to dim out when it nears the end of the indicated life. When this happens, buying a projector replacement lamp is the solution. To buy genuine projector lamp or projector replacement lamp, BulbToGo.com is the best place for you.

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)

Projector LampAn LCD projector has various applications. For presenting marketing proposals or for training new employees, LCD projectors are a great choice because of their excellent image quality and high resolution. One of the most important parts of an LCD projector is the light source, which is the LCD projector lamp.

When replacing a burned out projector lamp, not only should the LCD projector lamp you buy be compatible with the projector you have, it also should be of the highest quality. By making that bit of extra effort while selecting the replacement projector lamp, you can get the best out of your projector. If you opt for a low-quality projector lamp just to save a few bucks you’ll be ultimately compromising on the life of the lamp. For instance, if you buy a high-quality LCD projector lamp you can expect an operating life of over 4000 hours, which may not be the case if you go for a low-quality projector lamp.

An LCD projector makes use of either a metal halide lamp or a tungsten halogen lamp. Metal halide lamps, though a bit expensive, give a lamp life of about 500 hours. On the other hand, halogen lamps that are on the affordable side last for about 70 hours.

The quality of the LCD projector lamp greatly influences the performance of the projector. With a high quality projector lamp, you need not worry that it will die out in the middle of a presentation. So with a quality projector lamp and a little care while operating, such as operating in the “economy mode”, you can make sure that your LCD projector will last longer.

To get the best LCD replacement projector lamps of the highest quality, visit BulbToGo.com.

VN:F [1.6.3_896]
Rating: 5.0/5 (1 vote cast)
VN:F [1.6.3_896]
Rating: +1 (from 1 vote)

projector bulbDoes the word “relamping” sound strange to you? Well! Relamping is nothing but replacing the worn-out bulb in your projector lamp with a new one. This can be done either by the customer or anyone.

Misconception

People often think that relamping means buying a low-quality bulb even though there are so many good bare projector bulbs from top brands. But be wise and select a good projector lamp or a bulb as it will influence the longevity of your projector.

projector lampRelamping may be an economical mode, but you need to take care of certain precautions while doing it. If you do not replace it properly you may be causing irreparable damage to the bulb as well as the lamp housing. You’ll also be making the warranty of your projector void in the bargain.

• When you remove the bulb from the lamp housing make sure that you don’t break it and cause a mercury leak.

• Even a slight change in the angle of the burner will cause the projector lamp to burn bright and hot in particular areas and ultimately damage the LCD panel. So, ensure that the angle is accurately set.

• Take care that dust particles don’t accumulate in the housing. This will shorten the life span of the projector.

Above all, make sure that the replacement lamp that you buy is of the highest order in terms of quality. BulbToGo offers an exclusive range of lamps from leading brands such as Philips and Osram for projectors. Buy the one you want and relamp your projector keeping all these precautions in mind.

VN:F [1.6.3_896]
Rating: 4.7/5 (3 votes cast)
VN:F [1.6.3_896]
Rating: +3 (from 3 votes)

Projector LampLiquid Crystal Display (LCD) and Digital Light Processing (DLP) are two different kinds of projector technologies. Both LCD projectors and DLP projectors not only work differently, but also produce different results.

LCD Projectors – A projector lamp is the main source of light in LCD projectors. The light from this source is split into three beams, which then pass through three separate LCD glass panels. Each panel is fitted with a filter assigned to a separate color, red, green, and blue. Further, these LCD panels have numerous tiny pixels. These pixels either allow or block the light to produce the image that you see on the screen.

DLP ProjectorsDLP projectors have the projector lamp as the light source, just like LCD projectors. However, DLP projectors differ from LCD projectors in the fact that, the light from the projector lamp, instead of passing through LCD panels, is reflected off a DLP chip, which contains several tiny mirrors. These mirrors, by wobbling back and forth, generate the light modulation needed.

Difference

LCD multimedia projectors produce more saturated colors, whereas DLP multimedia projectors produce higher contrast ratios with deeper black levels. The compact size is another advantage of projectors using DLP technology. When it comes to light-efficiency, LCD projectors have an edge over DLP projectors.

Even with all these differences, there is one thing that is common to both these kinds of projectors – the projector lamp. If the lamp dies out after usage, it can be replaced, whatever the type of projector may be. The best place to buy projector replacement lamps of any kind is BulbToGo.com.

VN:F [1.6.3_896]
Rating: 4.7/5 (3 votes cast)
VN:F [1.6.3_896]
Rating: +3 (from 3 votes)



Copyright © 2009 The Bulb Blog All rights reserved.