THE BULB BLOG

Does the word “relamping” sound strange to you? Well! Relamping is nothing but replacing the worn-out bulb in your projector lamp with a new one. This can be done either by the customer or anyone.

Misconception

People often think that relamping means buying a low-quality bulb even though there are so many good bare projector bulbs from top brands. But be wise and select a good projector lamp or a bulb as it will influence the longevity of your projector.

Relamping may be an economical mode, but you need to take care of certain precautions while doing it. If you do not replace it properly you may be causing irreparable damage to the bulb as well as the lamp housing. You’ll also be making the warranty of your projector void in the bargain.

• When you remove the bulb from the lamp housing make sure that you don’t break it and cause a mercury leak.

• Even a slight change in the angle of the burner will cause the projector lamp to burn bright and hot in particular areas and ultimately damage the LCD panel. So, ensure that the angle is accurately set.

• Take care that dust particles don’t accumulate in the housing. This will shorten the life span of the projector.

Above all, make sure that the replacement lamp that you buy is of the highest order in terms of quality. BulbToGo offers an exclusive range of lamps from leading brands such as Philips and Osram for projectors. Buy the one you want and relamp your projector keeping all these precautions in mind.